OVERHEAD Inferred heater
Inferred heater Advantages:
• Cost effective save 25-60% of heating energy and heating costs
App 18c per hour, less if room is well insulated
• Environmentally friendly - does not dry the air, does burn dust, no sound and no smell no fumes.
• no frost protection required working flexibility at lower temperatures
• Helps prevent equipment corrosion of metal
• Non-air-flow mixing and drafts
• A quick starts and stops - for heating at a given time
• Can be fully automated
• 5-year warranty
heater usability:
• Mounted on the ceiling or wall in the upper room - does not take up space
• Fast room warm up
• Does not interfere with ventilation systems functioning
• Suitable for outdoor use
• Can be used as an additional heat source
• It can be used not only for heating but also for drying (e.g. construction of concrete drying and vehicle services, etc.)
Radiant heaters adaptation
Heating industrial premises and storage's
Garages, workshop, aggregates ,kennels, and individual work zones.
running cost
Watts /Panel size / Heated area / Volt/ hours/ cost
400 W / 80 x 12 x 5 cm/ 8 m2/ 240V/ 8 / app €0.61
600 W 104 x 12 x 5 cm 12 m2 240V 8 app €0.86
800 W 128 x 12 x 5 cm 16 m2 240V 8 app €1.15
1000 W 153 x 12 x 5 cm 20 m2 240V 8 app €1.80
1300 W 172 x 12 x 5 cm 26 m2 240V 8 app €1.87
Price based on average kw hour 18c inclusion of tax and vat (this may vary depending on your suppler ,check your bill for KW charge) however depending on room conditions the heater will not run for the 8 hours so the cost may be considerable less, on a insulated room about 30%.
Using the floor space lets say 3 m x 3.5m =10. 5m then multiply by 50 watts per sqm = 5.25 rounded this room would require a 600 watt unit
