.Inferred heating; Our Commercial Space heating ranges are revolutionizing the way homes and businesses can cost effetely heat there shops, workshops, kennels, smoking arrears, play rooms offices and much moor. Based on an average kilowatt unit of 19c (this may very depending on your electric supplier) heating an area of 20 sq meters, an 700 watt Infrared heater will have a running cost of €1.23c for 8 hours (less if the area is well insulated.) Inferred heating warms directly without heating the air in between. the heat goes where you want, unlike conventional heating it doesn't just convert upwards heating the ceiling. Inferred heating is specially designed to make thermal radiation very effective. The heat flow is produced quicker compared to gas or a classic electric heating system. How effective are Inferred heaters compared to other heating systems? Inferred heater does not heat the air, but heats the floor, walls, furniture etc. The floor and walls retain heat for a long time, and will give of heat even if the Inferred heater is turned off. Radiators, convector's and fan heaters and other types of traditional electric heating do not create such an effect and burn oxygen and dust witch trough electro static cling to walls and ceilings and is often seen as black marks.
Total noiselessness.
Energy efficiency .
Optimum micro climate DOS NOT dry out sinuses or your airway and help reduce the suffering of those with various allergies.
built in Safety
Durability
prevents the development of mold and damp in any room.
does not dehydrate or burn the air and doesn't generate or circle dust.
What are the benefits of Inferred heaters compared to conventional heaters?
Compared to OIL Savings of 60%
A fully installed system will on average give a saving of €1,170 over 5 months.
Compared to gas Savings of 40%
A fully installed system will on average give a saving of €885.00 over 5 months.
Compared to Solid fuels Savings of 20 to 30%
A fully installed system will on average give a saving of €750 coal and €500 turf over 5 months on average.
100% carbon free
No dust,
no cleaning out,
no waiting to light,
no fluctuation in temperature
no getting rid of ash.
High efficiency - 95% efficient; timer control
Operates in damp and wet areas such as bathrooms,wet rooms
Heats up only useful space;
No burning out of oxygen on the premises;
Heats up the premises evenly;
Protection against freezing;
Fireproof;
Portable (easy to install and dismantle);
Regulates and manages temperature on the premises in standalone mode;
No useful space occupancy;can be mounted on ceiling if required.
No maintenance cost; totally maintenance free.
Service life: 25+ years
Control and programming system allows the adjustment within a wide temperature range (5-30°С);
Safe as has overheat protection.
It not only creates a comfortable indoor climate, but also fits into the most modern interiors.
What is the operational cost of using Inferred heaters? Only the cost of energy, which will be between 20% to 60% less compared to conventional heating systems. There are no other expenses related to the use of this heating systems. high quality durable product at affordable price How much does it cost to install the heater? on average a 1000 watt unit fully installed €350 but this can very up or down depending on sizes etc. on existing property you can build your system one room at a time,with an average house costing around €4,000. How can inferred heaters be mounted?
Wall mounting
Wall mounting at 45 degree angle
Ceiling mounting
Free Stand
inserted
It is very easy to install inferred heaters. If you are moving, you can easily remove the heater and take it with you. They are compatible with all ventilation systems, as they do not cause air flow circulation. Inferred heater,s for outdoor areas (stadiums, outdoor chafes, stairways, smoking points) 100% carbon free. What is thermostat? Thermostat is a device that controls temperature (in our case the room temperature). Thermostat has a built-in temperature sensor, which is installed in an area free from direct impact of heating devices and provides information on air temperature in the area of location of the temperature sensor. On the basis of these data, the thermostat controls the heating devices in the room. The main functions of the thermostat are mainly the maintenance of comfort thermal mode and energy efficiency How many infered heaters do I need? The models and quantity of inferred heaters are chosen based on the heat loss on the premises, size of the premises and estimated temperature control. Our specialists will prepare thermal technical quote based on which the selection of the required quantity of inferred heaters and their positioning on the premises will be made. What is service life of infered heaters? Service life of infered heaters is 25+ years. What is the impact of infered heating on humans? Infered radiation is almost the same as normal light, the only difference is that the visible spectrum when falling on objects, lights them, and infered radiation heats. The Sun can be considered the biggest and most well-known radiant; the same heat comes from a heated battery or stove, ie. infered (radiant) heat is the closest to nature and biologically perfect. It has nothing to do with hard ultraviolet or X-ray radiation and due to the fact that humans feel the heat radiation and can adjust its effect, is harmless to the body. The main source of heating? infered heaters are efficient as the main as well as the additional source of heating. Why is the floor temperature is higher if the heat goes upwards? Warm air moves upwards, but the thing is that heating with inferred primarily heat the solids, and only then the air, Why the estimate is made for the capacity of the premises but not the square? This approach is explained by the fact that during radiant (inferred) heating the air is not cooled, therefore, to heat the room, there is no need to warm up the whole air that is inside. Inferred heaters warm the air but not the surface of objects that the heat rays fall on. This is primarily the floor and walls of the room. This principle is called the direct electric heating. How does the height of the premises affect the choice of an infered heater? The height of the heated space affects the selection of models. So, for example, it is not recommended to use 600 W inferred heaters on residential premises with a ceiling height of over 3.5 m. Because rays emitted by a low-powered inferred heater, dissipate before reaching the floor. On the contrary, if to place 2 kilowatt infered heater to a height less than 2.7 m, you will feel uncomfortable due to excessive heat. How is energy saving achieved with Inferred heaters? Firstly, energy saving is achieved, by the principle of operation of electric inferred heaters: inferred rays do not heat the air, which quickly disappears from the room, but heat walls, floor and entire house. Due to this, in its turn, the air heats on the premises and accumulated interior thermal energy will be transferring to the room atmosphere for quite a long time, so the electric inferred heater can be turned off by the thermostat at a given temperature, but the temperature will remain at a certain level for quite a long time, and then the thermostat will turn on the inferred heater again when the temperature falls below the programmed one for 1-2 C.
Will the Inferred heaterswith 500 W capacity use 500 W per hour? Inferred heaters will not work constantly when radiant heating system is properly designed and installed with the use of thermostats, it will switch on occasionally to maintain the temperature.
What role does thermostat play in energy saving? Thermostat plays the most important role. It is due to a temporary shut down of the electric connection of inferred heater when there is no need to continue its operation. Upon reaching a pre set temperature the thermostat turns off the heater and when the temperature falls below the pre set one for 1 – 2oC the thermostat turns on the heater thereby maintaining a predetermined temperature in the room.
How much electricity will Inferred heaters consume? During cold season the average operation of inferred heaters shall be 20-30 minutes per hour. In other words, the consumption of the energy by the heating system will be from 1/3 to1/2 of the set capacity of inferred heaters. More precise calculation can be provided by thermal technological estimate. Why inferred heaters are easier to manage than radiators? The reason of difficult manageability of radiators is their heating power. The long period of time is required to heat/cool the radiator. Comparing to radiators inferred heaters are ready for operation almost immediately and after switching them off heat energy flow rather rapidly decreases.
What is the main benefit of using inferred heaters for production facilities/warehouses? The main benefit of using inferred heaters for heating plants, warehouses or hangars is no need for costly distribution systems coolants (laying pipes, ducts, installation dispensing heads and radiators). The inferred heating has the benefit of local heating of the working space and there is no need to heat up the entire building regardless of its height. See our showroom display unit 1 Eden trading est Edenderry. check out our prices in our store page.